|
|
The IOtech team of Vibration Consultants is a unique cross-section of talented individuals who specialize
in providing our customers with complete, economical solutions for their applications needs. They have
the engineering depth and skill diversity to solve the most complex machinery vibration problems. If you
require training or assistance designing your system, contact one of our Vibration Consultants today. |
|
 600 Series
Dynamic Signal Analyzer (DSA)
Five Models Available – USB and Ethernet
|
|
Common Features
• Dedicated 24-bit, 105.4 kS/s delta sigma ADC
per analog input
• Spurious-free dynamic range of 108 dB (typical)
• AC/DC coupling, software selectable per channel
• TEDS support for accelerometers
• Pseudo-differential input
• Total harmonic distortion of -100 dB (typical)
• Channel-to-channel phase matching of
<0.12 degrees at 1 kHz
• 8-bit digital IO port
• USB 2.0 high-speed and 10/100BaseT Ethernet
versions available
NEW 652u 10-Channel Model
• USB interface
• 10 analog inputs, ±40V input range
(±60V max without damage)
• 4 mA IEPE current source per channels 1-10
(22V compliance)
• 0.1 Hz high-pass filter
640 Model
• USB or Ethernet interface
• 4 analog inputs, ±10V input range (±60V max without damage)
• 2.1 mA IEPE current source per channel (22V compliance)
• 1.0 Hz high-pass filter
• 24-bit delta sigma DAC analog output
• Analog outputs: sine, swept sine, random, burst, arbitrary
• Analog output signal-to-noise ratio: 100 dB (typical)
650 Model
• USB or Ethernet interface
• 5 analog inputs, ±40V input range (±60V max without damage)
• 2.1 mA IEPE current source per channels 1-4 (22V compliance)
• 0.1 Hz high-pass filter
Application Notes and White Papers
- Application Note #114 – Liquid Air-Separation Compressor Testing
- IOtech's 600 Series DSA was used to obtain waveform and spectra data in testing centrifugal compressors which operate at extremely high speeds.
- Induction Motor Testing and Evaluation
- DASYLab allows the user to configure customized software applications combining multiple input signal types and sources. Combining MCSA with standard vibration analysis techniques, and utilizing
- DASYLab’s Electrical Characteristics Module provides a complete view of over-all motor performance and health.
Complete Information
 To access complete product information in PDF format Please Click Here. (Updated 10-7-08)
For further information on other products and software for the 600 Series visit:
IOtech Calibration Module for the 600 Series
- Intuitive automated and manual mode operation for:
- Calibration and verification of 640u and 650u
- Calibration and verification of 640e and 650e
- Verification only procedures
- Metrology laboratory use
- Reporting capabilities for documenting results
- Runs under National Instruments Calibration Executive Version 3.2
This software module is intended for metrology laboratory use to facilitate the calibration of the IOtech 600 Series product family. It requires the use the National Instruments Calibration Executive
version 3.2.
Ordering Information
|
Description
|
Part No.
|
Price
|
Additional discount available with the purchase of two or more eZ-Series software packages.
Contact IOtech for a Quote on a complete system • 1.888.714.3272 • sales@iotech.com
|
| NEW 10-channel USB-based dynamic signal analyzer |
652u• |
$ 9,999 |
| Ethernet-based dynamic signal analyzer for NVH testing |
640e* |
$ 5,999 |
| Ethernet-based dynamic signal analyzer for rotating machinery and maintenance |
650e* |
$ 5,999 |
| USB-based dynamic signal analyzer for NVH testing |
640u* |
$ 5,999 |
| USB-based dynamic signal analyzer for rotating machinery and maintenance |
650u* |
$ 5,999 |
|
Calibration Module
|
| IOtech Calibration Module for 600 Series (requires 777608-02) |
501649 |
$ 999 |
| NI Calibration Executive Version 3.2.x |
777608-02 |
$ 2,499 |
|
Accessories & Cables
|
| Handle for 652 model |
HA-210-5-BK |
$ 20 |
| High-speed USB cable, 1 meter |
CA-179-1 |
$ 30 |
The below power supply unit requires an additional cable.
Please use CA-1 (USA) or CA-216 (European). |
CA-1 |
$ 10 |
| CA-216 |
$ 15 |
| External power supply, 90 to 264 VAC |
TR-2U |
$ 49 |
|
Software
|
|
Real-time vibration analysis and recording software for the 600 Series, WaveBook/516E, and ZonicBook/618E operating under all 32-bit versions
of Windows®
|
eZ-Analyst
|
$ 3,999 |
| Download a 30-day trial of eZ-Analyst. |
|
Machine balancing software for the 600 Series and ZonicBook/618E
|
eZ-Balance
|
$ 3,999 |
| Download a 30-day trial of eZ-Balance. |
|
Resonant inspection software for manual and automated systems
(not compatible with 652u model)
|
eZ-NDT
|
$ 4,999 |
| Download a 30-day trial of eZ-NDT. |
Rotating machine monitoring and analysis software for the 600 Series,
ZonicBook/618E, and WaveBook/516E |
eZ-TOMAS |
$ 3,999 |
| Download a 30-day trial of eZ-TOMAS. |
|
Remote access and control client for eZ-TOMAS
|
eZ-TOMAS Remote
|
$ 3,999 |
Download a 30-day trial of
eZ-TOMAS Remote. |
|
* Requires eZ-Analyst, eZ-Balance, eZ-NDT, or eZ-TOMAS software
Related Products
|
|
   
|
